Grouting is mostly tile, ceramic or concrete etc. It is a chemical component that fills the space in this region, which is applied between the products. Grouting is used in a wide area at work places in our houses, in short, wherever there are construction activities. Some wide usage areas of grouting can be listed as kitchen, bathroom, anteroom, pool or reverse. So what is epoxy grout?
Epoxy joint filler is a type of fast-applied, durable filler that is formed by the combination of two different components, including epoxy material. Epoxy fillers are generally preferred to fill gaps such as 2 mm to 15 mm. The most important advantage of this product is that it does not contain solvents, it is much easier to apply and clean. In addition, the resistance threshold is quite high compared to other filling types. Epoxy grouting uses are quite wide, including porcelain ceramics, glass mosaics or tiles. This type of filling can be used both indoors and outdoors.
Epoxy joint filler is a chemical used especially in areas where health and hygiene factors are at the forefront and therefore cement-based fillers are not preferred. At the beginning of these areas are areas such as food production areas, dining halls and kitchens, swimming pools or saunas.
Recommended article, sport floor covering click here to get detailed information about it.
How is Epoxy Grouting Made?
Epoxy grouting, rain, snow, etc. of the area to be applied. It is widely preferred in order to prevent it from being adversely affected by seasonal conditions. Especially in winter, water entering between tiles, ceramics or concrete may freeze and cause the structure to deteriorate or crack. Epoxy filler is one of the first methods preferred to overcome these and similar joint problems. So, what are the stages of epoxy grouting? What should be considered when filling? First of all, before starting to apply the epoxy filler, it should be noted that the shelf life of the product has not been completed.
1. While preparing the grouting mix, only the components written in the instructions should be used, no external component should be added to the mix.
2. Care should be taken to ensure that the temperature in the area to be applied is between 5 and 30 degrees. If it is to be applied in a cold area, it should be kept at room temperature beforehand so that the filler can be applied comfortably.
3. Care should be taken that there is no lumping in the prepared mixture and that the prepared mixture is completely homogeneous.
4. The area where the epoxy grout will be applied should be cleaned from dirt and mud and moistened slightly.
5. Experienced personnel should be used to increase product efficiency, especially during the application of the filler.
6. The prepared filling material should be fed with a special epoxy filling trowel/comb in such a way that no gaps remain.
7. Subsequently, sponge etc. The filling used with an object should be erased.
8. Leftover material can be cleaned with hot water or detergent solution.
What are Epoxy Grouting Properties?
The places where epoxy filler is used and the color variety is quite high. The main epoxy grouting properties are as listed.
1. Resistant to chemical products, acids, oils and bacteria.
2. It has antibacterial properties, so it prevents the formation of fungus or mold.
3. Does not darken, preserves its color for many years.
4. It prevents water and liquids from leaking into the joint area. Provides liquid insulation
5. Suitable for application on vertical surfaces, does not slip
6. It is highly resistant to heavy loads, pressures and abrasions.
7. Easy to apply and comb.
8. It is resistant to cleaning materials such as bleach, detergent, salt spirit, thinner, etc.
9. Resistant to temperature changes.
10. Stain-proof, easy to clean.
11. It can be used in joint gaps with a width of approximately 2 to 15 mm.
What are the Usage Areas of Epoxy Fillers?
The most basic factor that determines the usage areas of epoxy grouting is that the product is antibacterial and durable.
Because of these features,
1. It is used in food production areas such as restaurants, dairy production facilities and meat integrated facilities.
2. It is used in textile production centers.
3. It is used in hospital, laboratory or drug production facilities.
4. It is used in production facilities where high chemical and physical resistance is required.
5. It is used in swimming pools, Turkish bath, sauna or waste water facilities.
How to Clean Epoxy Grouting?
Epoxy grouts can be easily cleaned with hot water or detergent water. In addition, it can be preferred in specially produced products for epoxy cleaning purposes. After making sure that the epoxy application is set by waiting for at least 24 hours, pour the cleaning material/product you have prepared into the application area so that it covers the entire surface. About 20 min. wait. This period can be extended for difficult stains. If available, scrub the floor for half an hour with the help of a brush if it is not available with floor washing machines. After this process, clean the floor with water.
Flooring Systems 